I bought an ASUS UX32VD notebook. In the BIOS the 256 GB SSD is configured to Drive 0 and Drive 1 each 128 GB. I wiped out all the factory partitions on initial clean install to get rid of ASUS bloatware. Bad move it seems. However since Drive 0 = OS(C:) showed 91.6 GB of which only 51.3 were free and Drive 1 = DATA (D:) 116 GB with 112 GB free I figured a clean install would give me a portion of the missing 55 GB back. So my question is when I get to the section in the install process
how do I partition drives so Win 8.1 will recognize the RAID. RAID is set in the BIOS as well. On this my 5th or 6th attempt I created 2 equal partitions. After windows created it's 300 MB and 100MB partitons Disk Management shows Disk 0 (C:) 119 MB and
Disk 1 (D:) 119 MB. Still no RAID
I don't know that it is connected to the problem in Device Manager it shows Unknown Device PCI Data Acquisition and Signal Processing Controller. After going into Hardware Ids and finding the ID a search finally got me to Intel and a driver
Download. Installed the D/L and still not working.
Any help or suggestions appreciated. Thanks Dan.
