Hi Folks,
I rebuilt the Windows RE after upgrading to W 8.1 Pro from W 8.0 Pro using Command Prompts, recimg.exe and reagentc.exe. I now can get into Startup Repair through the boot up without using the Install DVD but I get the subject line at the bottom of the usual tests that come out 0x0 (same as I get from the DVD).
Startup Repair diagnosis and repair log
---------------------------
Number of repair attempts: 1
Session details
---------------------------
System Disk = \Device\Harddisk0
Windows directory = C:\Windows
AutoChk Run = 0
Number of root causes = 1
Test Performed:
---------------------------
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms
Test Performed:
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 47 ms
Test Performed:
---------------------------
Name: Target OS test
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms
Test Performed:
---------------------------
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken = 203 ms
Root cause found:
---------------------------
The operating system version is incompatible with Startup Repair <<<<<<<<<<<<<<<<<<<<<<<<<<<<<
---------------------------
---------------------------
I believe, if I could get a W 8.1 Pro ISO, I could get proper WIM images that are directly compatible with W 8.1 Pro. Every time I have tried, I could only get W 8.0 Pro ISO.
1. Is it possible to get a W 8.1 Pro ISO?
2. Where could I get the appropriate W 8.1 Pro "install.wim" and "boot.wim" (for the WinRE.wim") files?
I use DISM and SFC zealously which are coming out clean. I do not know how to get the above files into the component image store. Perhaps somebody could guide as to how to get them that way, then I could copy them into my Windows RE locations?
Best Regards,
Crysta
I rebuilt the Windows RE after upgrading to W 8.1 Pro from W 8.0 Pro using Command Prompts, recimg.exe and reagentc.exe. I now can get into Startup Repair through the boot up without using the Install DVD but I get the subject line at the bottom of the usual tests that come out 0x0 (same as I get from the DVD).
Startup Repair diagnosis and repair log
---------------------------
Number of repair attempts: 1
Session details
---------------------------
System Disk = \Device\Harddisk0
Windows directory = C:\Windows
AutoChk Run = 0
Number of root causes = 1
Test Performed:
---------------------------
Name: Check for updates
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: System disk test
Result: Completed successfully. Error code = 0x0
Time taken = 0 ms
Test Performed:
---------------------------
Name: Disk failure diagnosis
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms
Test Performed:
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code = 0x0
Time taken = 47 ms
Test Performed:
---------------------------
Name: Target OS test
Result: Completed successfully. Error code = 0x0
Time taken = 78 ms
Test Performed:
---------------------------
Name: Volume content check
Result: Completed successfully. Error code = 0x0
Time taken = 203 ms
Root cause found:
---------------------------
The operating system version is incompatible with Startup Repair <<<<<<<<<<<<<<<<<<<<<<<<<<<<<
---------------------------
---------------------------
I believe, if I could get a W 8.1 Pro ISO, I could get proper WIM images that are directly compatible with W 8.1 Pro. Every time I have tried, I could only get W 8.0 Pro ISO.
1. Is it possible to get a W 8.1 Pro ISO?
2. Where could I get the appropriate W 8.1 Pro "install.wim" and "boot.wim" (for the WinRE.wim") files?
I use DISM and SFC zealously which are coming out clean. I do not know how to get the above files into the component image store. Perhaps somebody could guide as to how to get them that way, then I could copy them into my Windows RE locations?
Best Regards,
Crysta
PhotM Phantom of the Mobile